Unravelling the true MOF-5 luminescence.

Highly pure millimeter-sized MOF-5 single crystals were synthesized and characterized. Photoluminescence (PL) spectroscopy and time-correlated single photon counting (TCSPC) demonstrate a solvent-guest dependency of MOF-5 emission and its ligand-centred nature. These results allow measuring the true MOF-5 luminescence free of solvent at a wavelength of 355 nm, a significantly lower wavelength than previously published. MOF-5 emission was also evaluated with different solvents and various degrees of water intake, explaining previously published observations. Comparison between lifetimes shows the fluorophore stabilization within the frameworks and demonstrates the progressive influence of the Zn4O subunits on the fluorescence during hydration. Overall, this work highlights the necessity to obtain phase-pure material, especially when moisture sensitivity can play a role, before ascribing electronic transitions. This study is a rigorous new take on the iconic MOF-5 and on its photoluminescence properties.

Large irradiation doses can improve the fast neutron/gamma discriminating capability of plastic scintillators.

When new materials appear as potential alternatives for radiation detection, several criteria have to be fulfilled. The one presented herein is the response variation to large irradiation doses of neutron/gamma discriminating plastic scintillators. Thus, several samples were exposed to high gamma doses reaching 10 kGy. They were characterized in terms of gamma spectrometry and fast neutron/gamma discrimination, prior to and after irradiation. Results show an unexpected increase of the figure of merit (FoM), which is the numerical value for n/γ discrimination performances. An in-depth investigation evaluates the physicochemical impact of such large doses within the material. The characterization includes photophysics, radiation/matter interaction and chemical analyses (EPR, 1H NMR, fluorescence spectroscopy and HRMS).

Role of the Bridging Group in Bis-Pyridyl Ligands: Enhancing Both the Photo- and Electroluminescent Features of Cationic (IPr)CuI Complexes.

We report on the benefits of changing the bridging group X of bis-pyridyl ligands, that is, Py-X-Py where X is NH, CH2 , C(CH3 )2 , or PPh, on the photo- and electroluminescent properties of a new family of luminescent cationic H-heterocyclic carbene (NHC) copper(I) complexes. A joint experimental and theoretical study demonstrates that the bridging group affects the molecular conformation from a planar-like structure (X is NH and CH2 ) to a boat-like structure (X is C(CH3 )2 and PPh), leading to i) four-fold enhancement of the photoluminescence quantum yield (ϕem ) without affecting the thermally activated delayed fluorescence mechanism, and ii) one order of magnitude reduction of the ionic conductivity (σ) of thin films. This leads to an overall enhancement of the device efficacy and luminance owing to the increased ϕem and the use of low applied driving currents.

N-(2-Ethylhexyl)carbazole: A New Fluorophore Highly Suitable as a Monomolecular Liquid Scintillator.

The synthesis, photophysical properties, and applications in scintillation counting of N-(2-ethylhexyl)carbazole (EHCz) are reported. This molecule displays all of the required characteristics for an efficient liquid scintillator (emission wavelength, scintillation yield), and can be used without any extra fluorophores. Thus, its scintillation properties are discussed, as well as its fast neutron/gamma discrimination. For the latter application, the material is compared with the traditional liquid scintillator BC-501 A, and other liquid fluorescent molecules classically used as scintillation solvents, such as xylene, pseudocumene (PC), linear alkylbenzenes (LAB), diisopropylnaphthalene (DIN), 1-methylnaphthalene (1-MeNapht), and 4-isopropylbiphenyl (iPrBiph). For the first time, an excimeric form of a molecule has been advantageously used in scintillation counting. A moderate discrimination between fast neutrons and gamma rays was observed in bulk EHCz, with an apparent neutron/gamma discrimination potential half of that of BC-501 A.

Designing NHC-Copper(I) Dipyridylamine Complexes for Blue Light-Emitting Electrochemical Cells.

This study presents the influence of various substituents on the photophysical features of heteroleptic copper(I) complexes bearing both N-heterocyclic carbene (NHC) and dipyridylamine (dpa = dipyridylamine skeleton corresponding to ligand L1) ligands. The luminescent properties have been compared to our recently reported archetypal blue emitting [Cu(IPr)(dpa)][PF6] complex. The choice of the substituents on both ligands has been guided to explore the effect of the electron donor/acceptor and "push-pull" on the emission wavelengths and photoluminescence quantum yields. A selection of the best candidates in terms of their photophysical features were applied for developing the first blue light-emitting electrochemical cells (LECs) based on copper(I) complexes. The device analysis suggests that the main concern is the moderate redox stability of the complexes under high applied driving currents, leading to devices with moderate stabilities pointing to a proof-of-concept for further development. Nevertheless, under low applied driving currents the blue emission is stable, showing performance levels competitive to those reported for blue LECs based on iridium(III) complexes. Overall, this work provides valuable guidelines to tackle the design of enhanced NHC copper complexes for lighting applications in the near future.

Efficient sensing of explosives by using fluorescent nonporous films of oligophenyleneethynylene derivatives thanks to optimal structure orientation and exciton migration.

The fluorescence of thin films of a diimine-substituted phenyleneethynylene compound can be efficiently quenched by nitroaromatic vapors, which is not the case for the unsubstituted parent compound. Thin-film porosity is usually considered to be an essential factor for efficient quenching, but in the present case the origin of the quenching is completely different, as both films are nonporous and hermetic to 2,4-dinitrotoluene (DNT) molecules. The molecular organization in the two crystallized thin films offers a low level of π stacking for both compounds, but the orientation of the phenylenethynylene fluorophore differs markedly with respect to the surface of the films. For the substituted compound, the fluorophore is almost parallel to the surface, thus making it readily available to molecules of a nitroaromatic quencher. This rationale is also observed in the case of a related compound bearing methoxy side chains instead of the long octyloxy moieties. Fluorescence-lifetime experiments show that the efficient quenching process in the nonporous crystallized films of the substituted compound is due to a fast (<70 ps) diffusion of excitons from the bulk of the film toward the surface where they are quenched, thus providing evidence of antenna effects.

Nanoparticle organization through photoinduced bulk mass transfer.

A series of dipolar triphenylaminoazo derivatives, with largely distinct charge transfer and glass transition temperatures, has been synthesized. Their photomigration capability in the solid state to form surface relief gratings (SRGs) under interferential illumination has been investigated with respect to their photochromic properties and showed a prevailing influence of the bulkiness of the azo substituent. The azo mass transfer was utilized to efficiently photoalign 200 nm polystyrene nanoparticles along the SRG crests, which were initially deposited on nonirradiated azo surfaces. In contrast, nanoparticles spin cast on prestructured surface relief gratings were localized in the troughs of the periodic structures. These distinct locations point out the ability of isotropic and amorphous photochromic thin films to collectively move and organize nano-objects in an ordered fashion through the use of polarized illumination. This versatile approach opens the path to optically aligned ensembles of individual nano-objects over large areas, which can be further combined with metallic conductive or magnetic coating to create novel functional nanostructures.

Spectroscopy of BODIPY in solid phase: crystal and nanoparticles.

We compare the absorption and fluorescence spectra of single crystals and suspensions of nanoparticles with the prediction of the Frenkel theory. The single crystals of a novel synthesized fluorescent BODIPY derivative dye, adamantyl mesityl BODIPY (4,4-difluoro-3,5-di-(adamantyl)-8-mesityl-4-bora-3a,4a-diaza-s-indacene), have been prepared. Their birefringence and dichroism have been studied. The X-ray crystallography shows a monoclinic crystal with all transition moments parallel to one common plane. The refractive indices along the two neutral axes have been measured for a wavelength from 530 to 700 nm, with a difference, Δn equal to 0.11. The Frenkel exciton theory was used here to describe the coupling of the electronic excited states in the crystals. The coupling estimated by the dipolar approximation was compared with the excited state splitting calculated by TDDFT in dimers. A perfect crystal absorption spectrum is predicted. The spectral broadening that occurs at room temperature is also taken into account. The absorption spectrum of the monocrystal is reproduced without adjustable parameters. But we had to take into account the presence of optical leaks in our microspectrophotometer before comparing experiment and theory. The controlled size nanoparticles (NPs) produced by our 3D hydrodynamic focusing microfluidic system exhibit molecule like absorption. We could reproduce their absorption and fluorescence spectra assuming a strong disorder in the Frenkel model. We conclude that the nanoparticles are amorphous.

Quenching dynamics in CdSe nanoparticles: surface-induced defects upon dilution.

We have analyzed the decays of the fluorescence of colloidal CdSe quantum dots (QDs) suspensions during dilution and titration by the ligands. A ligand shell made of a combination of trioctylphosphine (TOP), oleylamine (OA), and stearic acid (SA) stabilizes the as-synthesized QDs. The composition of the shell was analyzed and quantified using high resolution liquid state 1H nuclear magnetic resonance (NMR) spectroscopy. A quenching of the fluorescence of the QDs is observed upon removal of the ligands by diluting the stock solution of the QDs. The fluorescence is restored by the addition of TOP. We analyze the results by assuming a binomial distribution of quenchers among the QDs and predict a linear trend in the time-resolved fluorescence decays. We have used a nonparametric analysis to show that for our QDs, 3.0 ± 0.1 quenching sites per QD on average are revealed by the removal of TOP. We moreover show that the quenching rates of the quenching sites add up. The decay per quenching site can be compared with the decay at saturation of the dilution effect. This provides a value of 2.88 ± 0.02 for the number of quenchers per QD. We extract the quenching dynamics of one site. It appears to be a process with a distribution of rates that does not involve the ligands.

Tunable emissive thin films through ICT photodisruption of nitro-substituted triarylamines.

UV-assisted photocleavage in the solid state of orange emitting nitro-substituted triarylamines leads to the appearance of blue emission following photodisruption of the ICT state.

Synthesis and optical properties of 2-(benzo[b]thiophene-3-yl)pyrroles and a new BODIPY fluorophore (BODIPY = 4,4-difluoro-4-bora-3a,4a-diaza-s-indacene).

2-(Benzo[b]thiophene-3-yl)-1-vinylpyrrole has been synthesized directly from 3-acetylbenzo[b]thiophene oxime and acetylene (flow system, KOH-DMSO, 120 degrees C, 5 h) in 68% yield. Devinylation of the synthesized pyrrole (Hg(OAc)(2), NaBH(4), 50 degrees C) led to the corresponding 2-(benzo[b]thiophene-3-yl)pyrrole in 63% yield. Trifluoroacetylation of both the pyrroles with trifluoroacetic anhydride (80 degrees C, 1 h) gave the corresponding 5-trifluoroacetyl pyrroles in 97% and 76% yields, respectively. 2-(Benzo[b]thiophene-3-yl)pyrrole was reacted subsequently with mesityl aldehyde, 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ), and BF(3)OEt(2) to afford 4,4-difluoro-3,5-di(benzo[b]thiophene-3-yl)-8-mesityl-4-bora-3a,4a-diaza-s-indacene, a representative of the novel BODIPY fluorophore family (BODIPY = 4,4-difluoro-4-bora-3a,4a-diaza-s-indacene), in 34% overall yield. The synthesized pyrroles exhibit promising optical properties (absorption and emission spectra, nonlinear optical (NLO) features), superior to existing analogues. The BODIPY fluorophore displays an intense red-shifted fluorescence emission in CH(2)Cl(2) (625 nm, 0.84 fluorescence quantum yield) that is fully preserved in the solid state.

Assessment of cellular actin dynamics by measurement of fluorescence anisotropy.

To study cellular actin dynamics, a cell-free assay based on fluorescence anisotropy was developed. Using G-actin-Alexa as a probe, we found that anisotropy enhancement reflects F-actin elongation. Anisotropy enhancement varies with the concentration of magnesium and calcium cations and with ethylenediaminetetraacetate or well-known effectors of the polymerization. This assay gives the overall status of actin dynamics in cell extracts which are the closest conditions to in vivo, implying most of the regulating proteins that are missing in purified actin measurements. It can be used in a large-scale screening for chemical compounds which modulate actin polymerization.

Fluorescent nanoparticles as selective Cu(II) sensors.

Latex nanoparticles functionalized with cyclam (1,4,8,11-tetraazacyclotetradecane), a copper chelator, have been doped with a fluorescent dye (BODIPY derivative: 4,4-difluoro-8-(2',4',6'-trimethyl)phenyl-2,6-diethyl-1,3,5,7-tetramethyl-4-bora-3a,4a-diaza-s-indacene). The bulky, hydrophobic fluorophore dissolves within the nanoparticles' polymer core up to a concentration of about 88.4 micromol g(-1). At this concentration the fluorescence yield is about 0.80. Adding Cu2+ ions to the solution decreases the fluorescence because of the energy transfer between the dye and the violet copper cyclam complexes. The response is fast: 90% of the quenching occurs within 1 s. The Cu2+ detection threshold is of 1 nanomolar. No interferences were observed with zinc and nickel ions.